bearing pressure

Sealed bearing system reduces clamping pressure and increases bearing life.

密封的轴承系统减少夹持力并增加轴承寿命.

The smoke of steel ball bearing pressure such as depth limit ring precision sure.

钢球的烟如深度有轴承压限位环精度确定。

The Technology of FRP Composites and Its Application in Industry; Thought on Technical Permission of Welding Material for the Bearing Pressure Equipment in Steel

现代工业玻璃钢复合材料及其成形技术钢质承压设备用焊接材料技术条件的思考

FEM Analysis of Bearing Pressure at Bolted Joint for the Heterogeneous Bolt with the Internal Radius

异形内R型螺栓头部支承面压力有限元分析

Using magnetic fluid dynamics and thermodynamics theory, a study on the results of axial bearing pressure ability of rotation axis magnetic fluid static seals was introduced.

介绍了利用磁流体动力学、热力学理论，研究旋转轴磁流体静密封轴向承压能力的结果。

The effect of b on bearing pressure is discussed, and the results show that the bearing capacity of rock changes with b.

并讨论了b对承载压力的影响，分析表明：岩基承载力随着b值的变化而不同，从而说明所推导公式对岩基承载力计算有一定的指导意义。

Oil Film Bearing Pressure Numerical Analysis Method Based on Flow Continuity Under Condition of Large Whirl

偏心大涡动下油膜轴承压力场数值分析方法

Necessity on Safety Monitoring about Welding Materials for Bearing Pressure Equipment

论对承压设备用焊接材料实施安全监督的必要性

On Some Disputing Points of Pressure Vessels in Pressure Proof Tests The Design and Study of Bearing Pressure Capability and Gas Tightness Checking System

压力容器耐压试验中几个有争议的问题述评耐压及气密性试验系统的研制

The practical problem of the allowable pressure of the proposed bearing layer is discussed.

并探讨了有关建议中提出的桩端持力层容许承载力参考数值的实用问题。

As bearing pressure isn't enough beam and plate deformation of reinforcement concrete is much big, crack is much wide and rusting is serious.

由于承载力不足使钢筋混凝土梁的变形过大，裂缝过大，钢筋锈蚀严重等。

Pile-bucket foundation characteristic is the capacity of bearing pressure loading, uplift-loading and horizontal loading.

桩-桶基础的性能包括承压、抗拔和抗水平荷载。

Testing Contrast Analysis on the Bearing Behavior of Pressure Pumped CFG Pile Using Continuous Flight Augers Drilling

长螺旋钻孔管内泵压CFG桩承载力性状的对比试验分析

Calculation of Eccentricity of Bearing Pressure Acting on Middle Masonry of Continuous Beam

连续梁中间支承砌体所受支承压力的偏心距计算

Welding materials are one of the major materials of bearing pressure equipment.

焊接材料是承压设备用主要材料之一.

The bearing pressure distribution calculation model based on radial basis function theory

基于径向基函数的滑动轴承压力分布求解模型

Detection of bearing pressure on composite foundation with Rayleigh wave method

浅析瑞雷波法检测复合地基承载力

Finally. the plane air bearing pressure field is calculated with this model and compared with finite difference method.

最后，用该模型计算了平面空气轴承的压力场，并与有限差分法进行了比较。

Because the two methods don't commonly sufficient quantum mold, they have great remnant stress after manufacture, reduce the capability of bearing pressure.

由于这两种成型方法一般都是不足量成型，钢管制造后有很大的内应力，降低了钢管的承压能力。

Thought on Technical Permission of Welding Material for the Bearing Pressure Equipment in Steel electrode, metal contact, for welding machines

钢质承压设备用焊接材料技术条件的思考电焊机金属接点焊条

Realization for Extreme Bearing Pressure of Null-Gravity Medium Ground

对无重介质地基极限承载力的认识

Several questions in nondestructive testing bearing pressure pile by power parameter ( frequency-initial velocity) method

动力参数（频率－初速）法无损检测承压桩中的几个问题

To solve the problems of great settlement 、 poor stability and low bearing pressure on foundation, it is necessary to treat the soft foundation in construction.

为解决该类土的压缩沉降量大，地基稳定性差，地基承载力低等问题，在工程建设中往往需要对软基进行处理。

Research on Bearing Pressure Water Source Proof Model of Plain and Fetch Water Tendency in Safety

平原承压水源论证模型及安全取水趋势研究

Study of the bearing pressure on pile foundation for granitic strongly weathered zone in the South Fujian

闽南花岗岩强风化带桩基承载力的研究

Experimental Study on Grouting into Wells for Water Collection in Energy Dissipation Ponds under the Condition of Bearing Pressure Water

消力池集水井承压条件下灌浆试验研究

Seamless experts in this way can be welded together, bearing pressure Yehao.

无缝管专家介绍这种方式可以焊接起来, 承压力也好.

Analysis and Optimization of Stability Bearing Pressure in Axle Center of Warehousing Rack Column

仓储货架框架立柱轴心受压的稳定性分析与优化

In the bearing pressure water body safe mining coal is relates the project question which the mine pit production safety and may continue to develop.

承压水体上安全采煤是关系到矿井生产安全和可持续发展的工程问题。

Secondly, the air-conditioning system reduces the bearing pressure and saves the investment of the equipment by using the subregional system about high and low pressure;

空调水系统采用高低压分区系统，减少了设备的承压能力，从而节省了设备的一次性投资。